7 Spray paint tips | Do's and
Don'ts to keep in mind
Spray paint is one of my
go-to methods for giving practically anything a whole new look, from furniture
to DIY projects. However, spray painting might be difficult if you want a
smooth, uniform finish without any drips, cracks, or bubbles.
Hearing the tinkling of
spray paint can and seeing a torrent of color cover a surface is satisfying.
However, Uneven coverage in stripes, paint accumulation in the corners, etc.,
are some of the nightmares while using spraypaints which you must definitely
avoid.
7spray paint
tips | Do's and Don'ts to keep in mind
To give spray painting a
fresh perspective, simply follow these Do's and Don't. Our specialists have
curated these tips and have been trying out these paints for several years now.
To ensure a smooth finish while you apply and a seamless process while you use
the paint, ensure to follow the tips.
DO Break down
the project into simpler parts.
It's important to have a
look at the job before you start painting. Taking it apart should be done if
possible. Always stock up on more paint than you anticipate using.
If you don't have enough
paint, you won't be able to finish in time for your one-hour deadline unless
you hurry to the store. That means the job will have to wait till tomorrow to
be completed. Get more cans than you think you'll need.
Even coverage,
visibility, and running avoidance are much improved. Still, you shouldn't take
it apart at random. Make sure the pieces can be quickly and easily put back
together by labeling them.
DO Start with a
Tack Coat and then apply in different directions.
Applying a
"tack" coat before the first complete coat is standard practice while
spraying a vertical surface. It takes around five minutes for a light mist, or
tack coat, to set. Tack coats are used to prevent paint from running because of
their rough surface.
Homeowners may prevent
"puddling" or "tripping" by spraying in a steady
back-and-forth motion, slightly overlapping each stroke, while holding the can
upright six to ten inches from the surface. Spraying beyond the scope of your
current endeavor is crucial.
Applying successive
coats in various directions can help you get an equal covering as you learn to
spray paint. You can avoid making zebra stripes if you turn around and explore
all the hidden spaces.
However, if you spray
too much paint on a vertical surface, you'll end up with drips that are
difficult to remove. Sanding is a major part of this process.
When spray painting, it
is much simpler to create a consistent finish if you just paint the upturned sides.
That way, the paint can balance itself out if you are accidentally overspray.
DO clean the
nozzle always before using a spray can
It's easy to overlook
the instructions for cleaning the nozzle on a spray paint can, despite their
presence on every can. You should clean the nozzle with a cloth or paper towel
after use.
To do this, hold the can
upside down and squeeze the nozzle until no more pigment appears in the spray.
If you omit this step, the spray pattern may be compromised the next time you
use the paint sprayer due to dried paint clogging the nozzle.
If you have additional
spray paint cans with unclogged nozzles, you can simply switch them out. They
just jump off and go on. Remove the clogged nozzle and soak it in nail polish
remover, acetone, or mineral spirits if you don't have any spares.
DO cover the
surrounding.
Spray paint from an
aerosol can easily cover a large area by seeping through cracks and crevices.
Considering how difficult it is to remove, you must take extra precautions to
prevent damage.
Put on gloves and a
face shield (goggles or a mask). If you're stuck indoors, the best thing to do
is throw open the windows.
Painting tiny details
within a small area ensures a professional finish. Make a poly booth for your
bigger projects. Stapling painter's plastic to the basement ceiling may prevent
dust from falling from the floor joists, which can be a problem if people walk
about noisily above. When you damp mop the floor, the dust won't be kicked up
by your feet.
You shouldn't use a fan
to hasten the drying process. Get dressed up well and put on a cap to keep your
hair out of the paint job. Turn off heaters, air conditioners, and fans an hour
or so before painting to allow dust to settle.
DON'T forget
the Primer and shake the spray can
Professionals recommend
shaking the can vigorously for at least two minutes. Two minutes of shaking
seems like an eternity, so setting a timer is useful. Your arm will fatigue,
but you must persevere.
Shaking the container
vigorously or gently will never seem to make much of a difference until you try
to apply spray paint in White. You will begin to see flecks of the desired
off-white tint intermixed with flecks of a lighter brown. The issue can be
solved by shaking the can for at least a minute.
You can hear the small
metal ball within the container, and it's there to help mix the particles and
liquids inside. Paint that has been shaken for too little time tends to seem
watery, which is not ideal for painting.
Also, professionals
stress the importance of priming the area to be painted. Compared to not using
priming, the paint adheres significantly better. The paint "may crack, flake,
and go on unevenly if you don't prep," Even though the paint seems to be
sticking, it may end up flaking after some time has passed.
DON'T paint
outdoors on a hot day.
The warning labels on
spray paint cans are there to keep you from spraying in the sun. Spray painting
on a really warm day will cause the paint to shrink. Moreover, the paint may
not dry fully around the borders if the temperature is too high.
You will not moderate
this until you notice a particularly rough surface in the paint. The paint
dries in the air before it touches the surface, causing these small bumps if
the temperature is too high. If you want to correct this, sanding is a must.
That's Why it's always
recommended to check the weather forecast beforehand. The temperature should be
between 50 and 90 degrees Fahrenheit, and the humidity level should be less
than 85 percent. See whether it's going to rain, too.
DON'T spray
thick or in deep layers to avoid cracking
It's generally accepted
that several thin coatings are preferable to one or two thick ones. The paint
will go on more evenly, leading to a more polished look. However, few people
have the self-discipline to really implement this recommendation. Don't try to
make up for spots you missed on the first pass by spraying heavily in those
areas.
Cracks may appear in
freshly sprayed paint if the paint is applied too thickly. Accordingly, it's
been established that painting requires at least two light layers (and three is
even better). Spray paint can be reapplied in a matter of minutes, so applying
many coats isn't a huge time commitment.
However, it is
recommended to wait at least 20 minutes in between applications, while drying
time might take anywhere between one to four hours. Because it seems dry to the
touch does not imply it is not wet.
Apply the last layer
with a brand-fresh can (and don't forget to shake it beforehand). The paint
that settles to the bottom of a can isn't as good and won't provide the desired
result.
Also, the best coverage
comes from applying the first layer against the grain and the second with it.
Light sanding between paint applications might help achieve a flawless surface
by removing the bumps.
Buy Cosmos
Spray Paints Today!
If you are looking to
get started into Graffiti, want to fix your furniture, almirah, and car, or
looking forward to getting some new colors to try your hands on, you are at the
right place! Enter into the new world of colors with Cosmos Sprays' premium
spray paints. We have devised several options for customers who wish to give
their product or art a fresh appearance or need to end up with the finishing
touches like never before.
Conclusion
Whether you're working
on an indoor or outdoor project, spray painting is a quick and enjoyable
option. Before applying the first coat of Cosmos spray paint to your project,
you should be sure that the right conditions have been established. Do you
still have concerns about spray painting? Let us know in the common section
below.